White Rodgers 1F92W-51 - Manual (Page 44)

44
QUESTIONS AND ANSWERS
1. How can I permanently change a part of my
program?
Press VIEW
PRGM
until you reach the time/tempera-
ture schedule you want. Then press or
and TIME
FWD
and TIME
BACK
to change the pro-
gram. See PROGRAMMING YOUR THERMO-
STAT.
2. How can I have no change in temperature
from one time period to another?
Simply select the same temperature for each
consecutive time period. For example, you may
select the same weekday EVE cooling tempera-
ture as you did for weekday DAY, which means
the temperature will not change when the EVE
period begins. See PROGRAMMING YOUR
THERMOSTAT.
3. How can I finish my programming if the dis-
play has already changed to time/tempera-
ture?
During programming, if no buttons are pressed
for five minutes, the thermostat will enter the
HOLD mode and maintain a constant tempera-
ture. The display will change to the time/tem-
perature mode. To resume programming, press
VIEW
PRGM
until you return to the point where you
stopped programming. Then you may continue
to program the thermostat normally. If you want
to stop programming at this point, press RUN
PRGM
to
start the normal program function. See PRO-
GRAMMING YOUR THERMOSTAT.