Western Telematic NBB-1600-D20 - Manual (Page 17)

3-5
Quick Start
3. Log Out: When you have finished communicating with the unit it is
important to always log off by issuing the appropriate NBB command,
rather than simply closing your Telnet or communications program.
When you log off using the proper NBB command, this ensures that the
unit has completely exited from command mode, and is not waiting for
the inactivity timeout to elapse before allowing additional connections.
a) Web Browser Interface: Click on the "Log Out" button.
b) Text Interface: Type
/X and press [Enter].
This completes the Quick Start Guide for the NBB. Prior to placing the unit
into operation, it is recommended to refer to the remainder of this User’s Guide
for important information regarding advanced configuration capabilities and
more detailed operation instructions. If you have further questions regarding
the NBB unit, please contact WTI Customer Support as described Appendix C.