Western Telematic NBB-1600-D20 - Manual (Page 24)

5-2
NBB-1600-D20/D16 Series: Network Boot Bars - User's Guide
5.2. Communicating with the NBB
In order to configure the unit or invoke command functions, you must first
connect to the NBB and access the command mode. As discussed in Section 3,
the NBB offers two separate command interfaces: the Web Browser Interface,
and the Text Interface.
The NBB also offers three different methods for accessing command mode;
via network, via external modem, or via local console. The Web Browser
Interface is only available when the NBB is contacted via network, and the
Text Interface is available via network, modem or local PC. The sections that
follow describe the procedure for accessing the Web Browser Interface or the
Text Interface.
Note: Configuration functions are only available when you have
logged into command mode using the System Password.
Figure 5.1: Plug Status Screen - Web Browser Interface (Sample Values Show)