Western Telematic NBB-1600-D20 User Manual

Page 31

Advertising
background image

5-9

Confi guration

Inactivity Timeout: Determines how long the NBB will wait for

additional commands during periods of inactivity. When the Timeout

Period elapses, the user will be disconnected from the NBB command

mode. (Default = 2 Minutes.)

Command Confirmation: When enabled, the NBB will display

a confirmation prompt before executing certain commands. When

disabled, the prompt will be suppressed and commands will be executed

immediately. (Default = On/Enabled.)

Automated Mode: When enabled, the NBB will execute switching,

reboot and exit commands without displaying a confirmation prompt,

status screen or confirmation messages. This allows the NBB to be

controlled by a device that generates commands to control switching

without human intervention. For more information, please refer to

Section 6.4. (Default = Off.)
Note:

When this option is enabled, security functions are

suppressed, and users are able to access System Level menus and

control plugs without entering a password. If security is a concern

and the Automated Mode is required, it is recommended to use the

IP Security feature (Section 5.3.4.1) to restrict access.

Manual Switch Button: Enables and configures the manual plug

control button. (Default = "On".)
Off: Disables the manual switch button.
On: Enables the manual switch button. When the manual switch

button is pressed and held for approximately three seconds, all

sixteen outlets will be effected.

Command Prompt: Allows the Text Interface command prompt to be

set to either "NBB", "IPS", or "NPS." (Default = NBB.)

Default Parameters: Resets the NBB to default parameters. All

menu selected parameters, including port names and passwords, will be

cleared. This option is only available via the Text Interface.

Note:

If this function is invoked via the Network Port, the IP

Address will not be reset until you break your connection to the

Network Port. If this function is invoked via the Console Port, the

IP Address will be reset immediately.

Advertising
This manual is related to the following products: