ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 127)

Dimension ES-2024 Ethernet Switch
Routing Protocol 19-1
This chapter shows you how to configure the static routing function.
19.1 Static Route
Static routes tell the ES-2024 how to forward the ES-2024’s own IP traffic when you configure the TCP/IP
parameters manually. This is generally useful for allowing management of the switch from a device with an IP
address on a different subnet from that of the switch’s IP address (remote management).
Click Routing Protocol in the navigation panel and then Static Routing to display the screen as shown.
Figure 19-1 Static Routing
The following table describes the related labels you use to create a static route.
Table 19-1 Static Routing
LABEL DESCRIPTION
Active This field allows you to activate/deactivate this static route.
Name Enter a descriptive name for this route. This is for identification purpose only.
Chapter 19
Routing Protocol