3 exit command, 4 ip commands – ZyXEL Communications ZyXEL Dimension ES-2024 User Manual
Page 161

Dimension ES-2024 Ethernet Switch
Introduction to CLI
25-11
Table 25-2 Command Summary: sys sw
COMMAND DESCRIPTION
trunk
The following commands relate to
trunking. Trunking is the grouping
of physical ports into one logical
higher-capacity link.
del
<id>
Delete a trunk group.
display
Displays current run-time trunk
settings.
listView
Displays member list of trunk.
set
<id>
<port_no...>
Sets members of a trunk group.
mc
set
<addr>
<port>...
Sets ports to a specific multicast
address.
del
<addr>
Deletes a specific multicast
address.
get
<addr>
Shows a multicast address’s
forwarding ports.
vlan
status
Displays VLAN status
type
<802.1q | port-based>
Sets VLAN mode
25.2.3 exit
Command
Table 25-3 Command Summary: exit
COMMAND
DESCRIPTION
exit
Ends the console or telnet
session.
25.2.4 ip
Commands
Table 25-4 Command Summary: ip
COMMAND DESCRIPTION
ip
address
[addr]
Displays the host IP address.
alias
<iface>
Sets an alias for the specified
interface.
aliasdis
<0|1>
Disables/enables the alias for the
specified interface.
arp status
Displays all interfaces’ IP Address
Resolution Protocol status.