Enabling rstp on the gigabit ports, 5 enabling rstp on the gigabit ports – ZyXEL Communications ZyXEL Dimension ES-2024 User Manual
Page 171
Advertising
Dimension ES-2024 Ethernet Switch
Command Examples
26-7
Syntax:
ip dhcp swif0 mode none
(This command disables DHCP on the switch interface (swif0))
ip dhcp swif0 status
(This command displays the DHCP status on the switch interface
(swif0))
An example is shown next.
Figure 26-12 ip dhcp Command Examples
26.5 Enabling rstp on the Gigabit Ports
Step 1.
First enable RSTP
sys sw rstp bridge enable
Step 2.
Then enable RSTP on the gigabit ports.
sys sw rstp port enable 25
sys sw rstp port enable 26
Step 3.
Save the configuration
config save
ES-2024> ip dhcp swif0 mode none
ES-2024> ip dhcp swif0 status
DHCP on iface swif0 is none
Advertising