ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 163)

Dimension ES-2024 Ethernet Switch
Introduction to CLI 25-13
Table 25-4 Command Summary: ip
COMMAND DESCRIPTION
dhcp <iface> client release Release DHCP information such
as the IP address from an
interface
dhcp <iface> client renew Renew the IP address on the
interface.
dns
stats clear Clears DNS statistics.
stats disp Displays DNS statistics.
25.2.5 config Command
Table 25-5 Command Summary: config
COMMAND DESCRIPTION
config save You can use the “config save” command to save 802.1Q, STP, Cluster
and IP configuration changes to non-volatile memory (Flash). These
changes are effective after you restart the switch.
However you cannot use “config save” for all other line command
configurations. These are saved in volatile memory (DRAM), so are not
effective after you restart the switch.