ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 160)

Dimension ES-2024 Ethernet Switch
25-10 Introduction to CLI
Table 25-2 Command Summary: sys sw
COMMAND DESCRIPTION
del <port> <MAC> <vid> Deletes a static MAC address on
the specified port.
ageSet <timeout> Sets aging timeout.
ageView Displays the aging timeout
period.
list <all | port_no> Displays the forwarding table
entries.
flush [port] Flushes learned MAC addresses
in the forwarding table.
count [port] Displays the number of MAC
addresses in the forwarding
table.
search <MAC> <VID> Searches the MAC/VID learned
on which port.
mirror The following commands relate to
port mirrors. Port mirroring is
copying traffic from one or all
ports to another or all ports for
external analysis.
enable Turns on port mirroring.
disable Turns off port mirroring.
display Displays current run-time port
mirror settings.
set <none | port_no...> Sets the mirrored port (s) (the
ports from which traffic is copied
to another port for analysis).
direction <ingress | egress | both> Sets the direction of mirrored
traffic.
port <monitor port_no> Sets the monitor port (the port to
which traffic is copied for
analysis).
bw The following commands relate to
defining a maximum allowable
bandwidth for incoming and/or
outgoing traffic flows for specified
ports.
display <port> Displays current run-time
bandwidth control settings.
set <port> <enable|disable> <ingress
rate[kbps]> <egress rate[kbps]>
Enables or disables bandwidth
control of ingress and/or egress
rates on individual ports.