ZyXEL Communications ZyXEL Dimension ES-2024 User Manual
Page 143
Dimension ES-2024 Ethernet Switch
Cluster Management
22-5
Figure 22-5 Configuring Cluster Management
Table 22-4 Configuring Cluster Management
LABEL DESCRIPTION
Active Select Active to have this switch become the cluster manager switch. A cluster can only have
one manager. Other (directly connected) switches that are set to be cluster managers will not
be visible in the Clustering Candidates list. If a switch that was previously a cluster member
is later set to become a cluster manager, then its Status is displayed as Error in the Cluster
Management Status screen and a warning icon (
) appears in the member summary list
below.
Name Type a name to identify the Clustering Manager. You may use up to 32 printable characters
(no spaces are allowed).
VID This is the Management VLAN ID and is only applicable if the switch is set to 802.1Q VLAN.
All switches must be in the same management VLAN group to belong to the same cluster.
Switches that are not in the same management VLAN group are not visible in the Clustering
Candidates list. This field is ignored if the Clustering Manager is using Port-based VLAN.