ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 109)

P-2302HW/HWL-P1 Series User’s Guide
Chapter 6 WAN 109
6.2.2 WAN Internet Connection Screen (Roadrunner)
Use this screen to set up an Ethernet connection using Roadrunner service with the ISP. To
access this screen, click Network > WAN > Internet Connection.
Figure 53 Network > WAN > Internet Connection (Roadrunner)
Each field is described in the following table.
Clone the
computer’s MAC
address - IP
Address This field is enabled if you select Spoof WAN MAC Address.
Enter the IP address of the computer whose MAC address you want the ZyXEL
Device to use instead of the default MAC address.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
Table 43 Network > WAN > Internet Connection (Ethernet)
LABEL DESCRIPTION
Table 44 Network > WAN > Internet Connection (Roadrunner)
LABEL DESCRIPTION
ISP Parameters
for Internet Access
Encapsulation Select Ethernet.
Service Type Select the Roadrunner service provided by your ISP.
User Name Enter the user name provided by your ISP.
Password Enter the password provided by your ISP.
Retype to Confirm Retype your password to make sure you entered it correctly.
Login Server IP
Address Enter the IP address of the login server provided by your ISP.