ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 56)

P-2302HW/HWL-P1 Series User’s Guide
56 Chapter 3 Wizard Setup
Figure 13 Manually Assign a WPA/WPA2 key
The following table describes the labels in this screen.
3.2.3.3 Manually Assign a WEP key
Choose Basic(WEP) to setup WEP encryption parameters.
Figure 14 Manually Assign a WEP key
Table 8 Manually Assign a WPA or WPA2 key
LABEL DESCRIPTION
Pre-Shared
Key Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.