ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 64)

P-2302HW/HWL-P1 Series User’s Guide
64 Chapter 3 Wizard Setup
Figure 20 Connection Wizard > IP Address (PPPoE)
The following table describes the labels in this screen.
Table 15 Connection Wizard > IP Address (PPPoE)
LABEL DESCRIPTION
My WAN IP
Address Enter the IP address provided by your ISP.
First DNS Server
Second DNS
Server
Third DNS Server
Select From ISP if your ISP dynamically assigns DNS server information. (In this
case, the ISP assigns the WAN IP address too. See Network > WAN > Internet
Connection.) The field to the right is read-only, and it displays the IP address
provided by your ISP.
Select User-Defined if you have the IP address of a DNS server. You might get it
from your ISP or from your network. Enter the IP address in the field to the right.
Select None if you do not want to use this DNS server. If you select None for all of
the DNS servers, you must use IP addresses to configure the ZyXEL Device and to
access the Internet.
< Back Click this to go to the previous screen.
Next > Click this to go to the next screen.
Exit Click this to close this screen and return to the main screen.