ZyXEL Communications P-2302HWL-P1 Series User Manual
Page 48
P-2302HW/HWL-P1 Series User’s Guide
48
Chapter 2 Introducing the Web Configurator
VoIP
SIP
SIP Settings
Use this screen to configure your ZyXEL Device’s Voice over IP settings.
QoS
Use this screen to configure your ZyXEL Device’s Quality of Service
settings.
Phone
Analog Phone
Use this screen to set up which SIP accounts use which phone ports for
incoming and outgoing calls.
Common
Use this screen to configure general phone port settings.
Region
Use this screen to set up regional and call service settings.
Phone Book
Incoming Call
Policy
Use this screen to set up call forwarding rules.
Speed Dial
Use this screen to configure speed dial numbers for SIP phone numbers.
PSTN Line
General
Use this screen to configure your ZyXEL Device’s settings for PSTN calls.
Trunking
General
Use this screen to enable trunking on your ZyXEL Device.
Peer Call
Use this screen to configure peer device authentication for trunking calls.
Call Rule
Use this screen to configure forwarding rules on your ZyXEL Device for
trunking calls.
Security
Firewall
General
Use this screen to activate/deactivate the firewall and log packets related to
firewall rules.
Services
Use this screen to enable service blocking (LAN to WAN firewall rules).
Content Filter
Filter
Use this screen to block sites containing certain keywords in the URL.
Schedule
Use this screen to set the days and times for the ZyXEL Device to perform
content filtering
Management
Static Route
IP Static Route
Use this screen to configure IP static routes.
Bandwidth
MGMT
Summary
Use this screen to enable bandwidth management on an interface and set
the maximum allowed bandwidth and scheduler for the interface.
Class Setup
Use this screen to define bandwidth classes.
Monitor
Use this screen to view bandwidth class statistics.
Remote MGMT
WWW
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Telnet
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
FTP
Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
SNMP
Use this screen to configure through which interface(s) and from which IP
address(es) users can use SNMP to access the ZyXEL Device.
DNS
Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
Security
Use this screen to change your anti-probing settings.
UPnP
General
Use this screen to enable UPnP on the ZyXEL Device.
Maintenance
Table 3 Navigation Panel Summary
LINK
TAB
FUNCTION