ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 180)

P-2302HW/HWL-P1 Series User’s Guide
180 Chapter 13 VoIP Trunking
Figure 92 VoIP > Trunking > Call Rule
Each field is described in the following table.
Table 76 VoIP > Trunking > Call Rule
LABEL DESCRIPTION
# This is a read-only index number of the call rules.
Pattern A Pattern is used when you call your ZyXEL Device from a PSTN phone and want
to use it to create a VoIP link to a remote peer device which will forward the call to
a PSTN phone.
A Pattern is a string of digits your ZyXEL Device uses to determine whether or not
to send the call to a peer VoIP device. For example, if you want to use trunking to
call phone numbers which start with the number “555”, then enter 555 in this field.
Enter up to 32 numeric characters.
If the number you dial does not match any of the patterns you configured, then you
can still use your ZyXEL Device to forward calls to VoIP phones. Simply dial the
SIP number of the VoIP phone you want to call.
Account Select the outgoing authentication account you set up in the Peer Call screen. This
account is used to direct your call to the correct remote peer device and to
authenticate you.
Select None to disable this forwarding rule.