3 main window, 4 status bar – ZyXEL Communications P-2302HWL-P1 Series User Manual
Page 49
P-2302HW/HWL-P1 Series User’s Guide
Chapter 2 Introducing the Web Configurator
49
2.4.3 Main Window
The main window shows the screen you select in the navigation panel. It is discussed in more
detail in the rest of this document.
Right after you log in, the Status screen is displayed. See
for more
information about the Status screen.
2.4.4 Status Bar
Check the status bar when you click Apply or OK to verify that the configuration has been
updated.
System
General
Use this screen to configure general system settings.
Dynamic DNS
Use this screen to set up dynamic DNS.
Time Setting
Use this screen to change your ZyXEL Device’s time and date.
Logs
View Log
Use this screen to view the logs for the categories that you selected.
Log Settings
Use this screen to change your ZyXEL Device’s log settings.
Tools
Firmware
Use this screen to upload firmware to your ZyXEL Device.
Configuration
Use this screen to backup and restore the configuration or reset the factory
defaults to your ZyXEL Device.
Restart
Use this screen to reboot the ZyXEL Device without turning the power off.
Table 3 Navigation Panel Summary
LINK
TAB
FUNCTION