ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 126)

P-2302HW/HWL-P1 Series User’s Guide
126 Chapter 7 LAN
Figure 62 Network > LAN > IP Alias
Each field is described in the following table.
Table 52 Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias 1
IP Alias 1 Select this to add the specified subnet to the LAN port.
IP Address Enter the IP address of the ZyXEL Device on the subnet.
IP Subnet Mask Enter the subnet mask of the subnet.
RIP Direction Use this field to control how much routing information the ZyXEL Device sends and
receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the
subnet.
Both - The ZyXEL Device sends and receives routing information on the subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.
RIP Version Select which version of RIP the ZyXEL Device uses when it sends or receives
information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.
IP Alias 2
IP Alias 2 Select this to add the specified subnet to the LAN port.
IP Address Enter the IP address of the ZyXEL Device on the subnet.
IP Subnet Mask Enter the subnet mask of the subnet.