ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 72)

P-2302HW/HWL-P1 Series User’s Guide
72 Chapter 3 Wizard Setup
3.4.2 General Information
Figure 28 Bandwidth Management Wizard > General Information
The following table describes the labels in this screen.
Table 22 Bandwidth Management Wizard > General Information
LABEL DESCRIPTION
Active Select this to enable bandwidth management. Bandwidth management applies to
all traffic flowing through the router.
Managed
Bandwidth (kbps) Enter the total amount of traffic the device can send to the WAN. It is
recommended to set this speed to what the device connected to the WAN can
handle. For example, set this field to 1000 kbps if a broadband device connected to
the WAN port has a maximum speed of 1000 kbps.
This does not affect the total amount of traffic the device can send to the LAN. See
Management > Bandwidth MGMT > Summary to do this.
< Back Click this to go to the previous screen.
Next > Click this to go to the next screen.
Exit Click this to close this screen and return to the main screen.