ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 177)

GS-3012/GS-3012F User’s Guide
Diagnostic 25-1
Chapter 25
Diagnostic
This chapter explains the Diagnostic screens.
25.1 Diagnostic
Click Management and then Diagnostic in the navigation panel to display this screen. Use this screen to check
system logs, ping IP addresses or perform loopback tests on a port.
Figure 25-1 Diagnostic
The following table describes the labels in this screen.
Table 25-1 Diagnostic
LABEL DESCRIPTION
System Log Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the syslog entry.
IP Ping Type the IP address of a device that you want to ping in order to test a connection.
Click Ping to have the switch ping the IP address (in the field to the left).
Ethernet Port
Test From the Port drop-down list box, select a port number and click Port Test to perform internal
loopback test.