ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 204)

GS-3012/GS-3012F User’s Guide
30-10 Introducing the Commands
Table 30-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
<port-list> Displays port security settings on the
specified port(s).
radius-server Displays RADIUS server settings.
remote-management Displays all secured client information.
<index> Displays the specified secured client
information.
running-config Displays current operating configuration.
service-control Displays service control settings.
snmp-server Displays SNMP settings.
spanning-tree config Displays Spanning Tree Protocol (STP)
settings.
ssh Displays general SSH settings.
key <rsa1|rsa|dsa> Displays the SSH public and private
keys
known-hosts Displays known SSH hosts information.
session Displays current SSH session(s).
system-information Displays general system information.
time Displays current system time and date.
timesync Displays time server information.
trunk Displays link aggregation information.
vlan Displays the status of all VLANs.
<vlan-id> Displays the status of the specified
VLAN.
vlan1q gvrp Displays GVRP setting.
port-isolation Displays port isolation setting.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
write memory Saves the configuration to the
configuration file the switch is currently
using.
<index> Saves the configuration to the specified
configuration file on the switch.