ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 197)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-3
Figure 30-2 CLI: Login Screen
30.4 Command Syntax Conventions
The rules of the commands are listed next.
The command keywords are in courier new font.
The required fields in a command are enclosed in angle brackets <>, for instance, ping <ip> means that
you must specify an IP number for this command.
The optional fields in a command are enclosed in square brackets []; for instance,
configure snmp-server [contact <system contact>] [location <system location>]
means that the contact and location fields are optional.
“Command” refers to a command used in the command line interface (CI command).
The | symbol means “or”.
The entry <cr> in the command lines refers to carriage return. Press [ENTER] or carriage return after a
command to execute the command.
Use the up (y) or down (z) arrow key to scroll through the command history list.
The CLI does not accept partial or incomplete commands. You may enter a unique part of a command and
press [TAB] to have the switch automatically display the full command. For example, if you enter config
and press [TAB], the full command of
configuration automatically displays.
Each interface refers to an Ethernet port on the switch. Commands configured after the interface command
correspond to those ports.
Type multiple ports or port ranges separated by a comma. Ranges of port numbers are typed separated by a
dash.
30.5 Getting Help
The system includes a help facility to provide you with the following information about the commands:
List of available commands under a command group.
Detailed descriptions of the commands.
30.5.1 List of Available Commands
Enter help to display a list of available commands and the corresponding sub commands.
Enter ? to display a list of commands you can use.
Enter User Name : admin
Enter Password : XXXX