ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 201)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-7
Table 30-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate <1|2|3|4|5> Changes the console port speed.
Choices are 1 (38400), 2 (19200),
3(9600), 4 (57600) and 5 (115200).
boot config <index> Restarts the system with the specified
configuration file (1 or 2).
configure Accesses Configuration mode.
copy running-config tftp
<ip> <remote-file>
Backs up running configuration to the
specified TFTP server with the specified
file name.
tftp config <index> <ip>
<remote-file>
Restores configuration with the specified
filename from the specified TFTP
server.
flash <ip> <remote-
file>
Restores firmware via TFTP.
disable Exits Enable (or privileged) mode.
enable Accesses Enable (or privileged) mode.
erase running-config Resets to the factory default settings.
exit Exits Enable (or privileged) mode.
help Displays help information.
history Displays a list of command(s) that you
have previously executed.
igmp-flush Removes all IGMP information.
kick tcp <Session ID> Drops a TCP session.
mac-flush Clears the MAC address table.
<port-num> Removes all learned MAC address on
the specified port(s).
no arp Flushes the ARP (Address Resolution
Protocol) table.
interface <port-
number>
Clears the interface status of the
specified port(s).
logging Clears the system log.
ping <ip|host-name>
[<in-band|out-of-
band|vlan <vlan-id>]
[size <0-1472>]
[-t]
Sends a Ping request to an Ethernet
device.
reload config <index> Restarts the system with the specified
configuration file.
show