ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 212)

GS-3012/GS-3012F User’s Guide
30-18 Introducing the Commands
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
policy <name> classifier
<classifier-list> <
[vlan<vlan-id>]
[egress-port <port-
num>]
[priority <0-7>]
[dscp <0-63>]
[tos <0-7>]
[bandwidth
<bandwidth>]
[egress-mask <port-
list>]
[outgoing-packet-
format
<tagged|untagged>]
[out-of-profile-
dscp <0-63>]
[forward-action
<drop|forward|egres
smask>]
[queue-action
<prio-set|prio-
queue|prio-replace-
tos>]
[diffserv-action
<diff-set-tos|diff-
replace-priority
|diff-set-dscp>]
[outgoing-mirror]
[outgoing-eport]
[outgoing-non-
unicast-eport ]
[outgoing-set-vlan
]
[metering]
[out-of-profile-
action <[change-
dscp][drop][
forward] [set-drop-
prec]>] [inactive]>
Configures a policy. A classifier
distinguishes traffic into flows
based on the configured criteria. A
policy rule ensures that a traffic
flow gets the requested treatment
in the network.
port-access-
authenticator Enables 802.1x authentication on
the switch.
<port-list> Enables 802.1x authentication on
the specified port(s).
<port-list>
reauthenticate
Sets a subscriber to periodically
re-enter his or her username and
password to stay connected to a
specified port.