Xerox 721P85530 - Manual (Page 152)

SPECIFYING INPUT PARAMETERS
4-64 XEROX DOCUPRINT 180 LPS PDL REFERENCE
Valid download file types
Files may be downloaded in two formats: card-image files and LPS-
labeled files. Certain destination file types are not accepted for either
LPS-labeled or card-image files. These are file types OSD, SAF,
SYS, $Y$, and TSK. In addition, card-image format files are
restricted to destination file types CMD, FSL, JSL, MSC, PCH, TMP,
and TPF.
DJDE FILE command
This DJDE provides a capability of loading card-image or LPS-
labeled files to the LPS disk while a printing job is in progress. The
print job can be invoked solely for the purpose of downloading files;
in other situations, the files can be interleaved with variable text data
so that they are available when referenced by input or output
processing. In either case, a DJDE packet must immediately precede
the data for a file (or batch of files) which is copied to the LPS disk.
The DJDE packet must include a FILE parameter that is used to
signal the start of the file data.
The FILE DJDE is record oriented and is applied immediately. It can
be included with other record-oriented or page-oriented DJDE
commands in a DJDE packet. Refer to the 4050/4090/4650 LPS
Command Reference for additional information on card-image file
processing.
Note: The DJDE FILE command does not allow a file replacement
or deletion transaction to occur if the file to be replaced or deleted is
secured and the logon level is not 5.