Xerox 721P85530 - Manual (Page 227)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 6-61
CYCLEFORMS
This parameter specifies a set of forms to be associated with report
pages in a cyclical fashion. Refer to the examples at the end of this
section.
Syntax OUTPUT CYCLEFORMS = option(s)
Options Table 6-41 lists the parameter option(s) and definition(s).
If multiple CYCLEFORMS left parts on the same OUTPUT command
are specified, a single list consisting of all forms specified in the
OUTPUT command is created.
The order of the list is the order in which the names are encountered.
The number of form-ids is limited only by the number of forms
retained on the disk.
Example OUTPUT CYCLEFORMS=( form
1
, form
2
,);
Table 6-42. CYCLEFORMS parameter option(s) and
definition(s)
Option(s) Definition(s)
form-id | ( form-id
1
[, form-id
2
][,...]) |
NONE
This option has the following components:
•
form-id
Specifies a 1 to 6 character file name (may be
numeric, alpha, or alphanumeric) which exists
on disk. This file is created by compiling a forms
description language source file, called an FSL
file with the FDL system task (refer to the
LPS
Forms Creation Guide for further details on
FDL).
• NONE
Means that no form is to be added to the
associated report page of variable data.
The default is NONE.