Xerox 721P85530 - Manual (Page 233)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 6-67
GRAPHICS
This parameter specifies how graphics are to be processed in a job.
Syntax OUTPUT GRAPHICS = option(s)
Options Table 6-49 lists the parameter option(s) and definition(s).
Considerations If you are using the IMAGE parameter in conjunction with
GRAPHICS, make sure to list the GRAPHICS parameter first, as
these two parameters are order dependent.
The Xerox DocuPrint 180 LPS does not process 2-color graphics.
Examples OUTPUT GRAPHICS=BATCH,
RESOLUTION=300;
OUTPUT GRAPHICS=MOVE,
RESOLUTION=300,
PURGE=NO;
Table 6-50. GRAPHICS parameter option(s) and definition(s)
Option(s) Definition(s)
NO Indicates that there are no graphics in this job.
The default is NO.
YES Indicates there are graphics.
MOVE Indicates that all referenced graphic disk files are to
be copied into the print file.
BATCH Means that the input stream contains no text, only
graphics which are to be imaged, one per page.
NOSUB Must be specified in the JDE using the GRAPHICS
parameter if no substitution for the missing graphic
image is desired. No substitution may be desired
where graphics are specified for imaging with a
reference scale factor that is greater than 4. Because
the maximum effective scale factor is 8, graphic
images in this case would be printed smaller than if
resolution were 300 spi, (RESOLUTION=300). Note
that this appearance error would not be indicated by
the system.