ZyXEL Communications GS-4012 - Manual (Page 345)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
345
logging
[all|none|permi
t|deny] Enables logging of ARP
inspection events on the
specified VLAN(s). Optionally
specifies which types of events
to log.
13
bandwidth-
control Enables bandwidth control. 13
bcp-
transparenc
y Enables Bridge Control Protocol
(BCP) transparency.
13
classifier <name> <[packet-
format
<802.3untag|802.3t
ag| EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan <vlan-
id>][ethernet-type
<ether-num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port
<port-num>]
[destination-mac
<dest-mac-addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|e
gp|
ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-
ip-addr> [mask-
bits <mask-bits>]]
[source-socket
<socket-num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-
socket <socket-
num>] [inactive]>
Configures a classifier. A
classifier groups traffic into data
flows according to specific
criteria such as the source
address, destination address,
source port number, destination
port number or incoming port
number.
13
help Displays help information for this
command.
13
cluster <vlan-id> Enables clustering in the
specified VLAN group.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE