ZyXEL Communications GS-4012 - Manual (Page 376)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
376
45.13 mvr Commands
The following table lists the mvr commands in configuration mode.
Table 143 Command Summary: mvr Commands
COMMAND DESCRIPTION
PRIVILEG
E
mvr <vlan-
id> Enters the MVR (Multicast
VLAN Registration)
configuration mode.
13
exit Exist from the MVR
configuration mode.
13
group <name-str>
start-address
<ip> end-address
<ip> Sets the multicast group range
for the MVR.
13
inactive Disables MVR settings. 13
mode <dynamic|
compatible> Sets the MVR mode (dynamic
or compatible).
13
name <name-str> Sets the MVR name for
identification purposes.
13
no group Disables all MVR group
settings.
13
group <name-str> Disables the specified MVR
group setting.
13
inactive Enables MVR. 13
receiver-port
<port-list> Disables the receiver port(s).An
MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port <port-
list> Disables the source port(s).An
MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
tagged <port-list> Sets the port(s) to untag VLAN
tags.
13
receiver-port
<port-list> Sets the receiver port(s).An
MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port
<port-list> Sets the source port(s).An
MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
tagged <port-
list> Sets the port(s) to tag VLAN
tags.
13
8021p-priority Sets the 802.1p priority for the
packets belonging to this VLAN
group.
13