ZyXEL Communications GS-4012 - Manual (Page 365)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
365
interface Enables sending all interface
type traps to a manager.
13
interface
<options> Enables sending all interface
type traps to a manager. The
options are “linkup”, “linkdown”
and “autonegotiation”.
13
ip Enables sending all IP type traps
to a manager.
13
ip <options> Enables sending all IP type traps
to a manager. The options are
“ping” or “traceroute”.
13
switch Enables sending all Switch type
traps to a manager.
13
switch
<options> Enables sending all Switch type
traps to a manager. The options
are “stp”, “mactable” or “rmon”.
13
system Enables sending all system type
traps to a manager.
13
system
<options> Enables sending all system type
traps to a manager. The options
are “coldstart”, “warmstart”,
“fanspeed”, “temperature”,
“voltage”, “reset”, “timesync”,
“intrusionlock” or “loopguard”.
13
username <name> sec-level
<noauth|auth|pr
iv> Sets the authentication level for
SNMP v3 user authentication.
13
sec-level
<noauth|auth|pr
iv> [auth
<md5sha>][priv
<des|aes>] Specifies the authentication and
encryption methods for
communication with the SNMP
manager.
13
version
<v2c|v3|v3v2c> Sets the SNMP version to use for
communication with the SNMP
manager.
13
spanning-
tree Enables STP on the Switch. 13
mode
<RSTP|MRSTP|MSTP> Specifies the STP mode you
want to implement on the Switch.
13
<port-list> Enables STP on a specified port. 13
<port-list> path-
cost <1-65535> Sets the STP path cost for a
specified port.
13
<port-list>
priority <0-255> Sets the priority for a specified
port.
13
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-
30> Sets Hello Time, Maximum Age
and Forward Delay.
13
help Displays help information. 13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE