ZyXEL Communications GS-4012 - Manual (Page 354)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
354
route <ip>
<mask> inactive Enables a specified IP static
route.
13
lacp Disables the link aggregation
control protocol (dynamic
trunking) on the Switch.
13
logins <name> Disables login access to the
specified name.
14
loopguard Disables loopguard on the
Switch.
13
mac-authentication Disables MAC authentication on
the Switch.
13
mac-authentication
timeout Resets the MAC authentication
timeout value on the Switch to
“0”.
13
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src|dst|both>
inactive Enables the specified MAC-filter
rule.
13
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src|dst|both> Disables the specified MAC filter
rule.
13
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id> Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
13
name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
inactive Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
13
mirror-port Disables port mirroring on the
Switch.
13
mrstp <treeIndex> Disables the specified STP
configuration.
13
mrstp interface
<port-list> Disables the STP assignment
from the specified port(s).
13
mstp Disables MSTP on the Switch. 13
<instance> <0-
16> Disables the specified MST
instance on the Switch.
13
<instance> <0-
16> vlan <1-
4094> Disables the assignment of
specific VLANs from an MST
instance.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE