ZyXEL Communications GS-4012 - Manual (Page 375)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
375
45.12.6 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 142 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan
<vlan-id> Creates a new VLAN group. 13
exit Leaves the VLAN configuration
mode.
13
fixed <port-list> Specifies the port(s) to be a
permanent member of this
VLAN group.
13
forbidden <port-
list> Specifies the port(s) you want to
prohibit from joining this VLAN
group.
13
help Displays a list of available VLAN
commands.
13
inactive Disables the specified VLAN. 13
ip address <ip-address> <mask> Sets the IP address of the
Switch in the VLAN.
13
<ip-address> <mask>
manageable Sets the IP address of the
Switch in the VLAN and allow
remote management to this IP
address.
13
default-gateway <ip-
address> Sets the default gateway IP
address in this VLAN.
13
name <name-str> Specifies a name for
identification purposes.
13
no fixed <port-list> Sets fixed port(s) to normal
port(s).
13
forbidden <port-
list> Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address <ip-
address> <mask> Deletes the IP address and
subnet mask from this VLAN.
13
ip address default-
gateway Deletes the default gateway
from this VLAN.
13
untagged <port-list> Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN
Group ID.
13
normal <port-
list> Specifies the port(s) to
dynamically join this VLAN
group using GVRP
13
untagged <port-
list> Specifies the port(s) you don’t
want to tag all outgoing frames
transmitted with this VLAN
Group ID.
13