ZyXEL Communications GS-4012 - Manual (Page 346)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
346
member <mac-
address> password
<password-str> Sets the cluster member. 13
name <cluster
name> Sets a descriptive name for the
cluster.
13
rcommand <mac-
address> Logs into the CLI of the specified
cluster member.
13
default-
management <in-band|out-of-
band> Specifies through which traffic
flow the Switch is to send
packets.
13
dhcp dhcp-vlan <vlan-
id>
Specifies the VLAN ID for the
DHCP VLAN.
13
dhcp relay <vlan-id> helper-address
<remote-dhcp-
server1> Enables DHCP relay on the
specified VLAN and sets the IP
address of 1 DHCP server.
13
helper-address
<remote-dhcp-
server1>
[<remote-dhcp-
server2>]
[<remote-dhcp-
server3>]
[option]
[information] Enables DHCP relay on the
specified VLAN and sets the IP
address of up to 3 DHCP
servers. Optionally sets the
Switch to add relay agent
information and system name.
13
server <vlan-id> starting-
address <ip-
addr> <subnet-
mask> size-of-
client-ip-pool
<1-253> Enables DHCP server for the
specified VLAN and specifies the
TCP/IP configuration details to
send to DHCP clients.
13
starting-
address <ip-
addr> <subnet-
mask> size-of-
client-ip-pool
<1-253>
[default-
gateway <ip-
addr>]
[primary-dns
<ip-addr>]
[secondary-dns
<ip-addr>] Enables DHCP server for the
specified VLAN and specifies the
TCP/IP configuration details to
send to DHCP clients.
Including default gateway IP
address and DNS server
information.
13
smart-relay Enables DHCP relay for all
broadcast domains on the
Switch.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE