Password level 3 parameters – Zebra S4M User Manual

Page 71

Advertising
background image

65

Configuration

Control Panel LCD Display

10/21/05

S4M User Guide

13290L-001 Rev. A

Password Level 3 Parameters

Table 11

shows parameters in the order in which they appear when you press the right arrow

after entering the Level 3 password. Throughout this process, press the right arrow to continue
to the next parameter or the left arrow to return to the previous parameter in the cycle.

Table 11 • Printer Parameters, Level 3 (Page 1 of 9)

Parameter

Explanation

PRINT OUT

Print Selected Labels
This parameter allows you to print certain types of labels with information
about the printer.
Selections:

SETTINGS

—Prints a printer configuration label. See

Printing

Configuration Labels on page 56

.

FONTS

(ZPL, EPL, APL-D)—Prints a label that lists the available

fonts in the printer, including standard printer fonts plus any optional
fonts. Fonts may be stored in RAM, Flash memory, optional memory
cards, or font cards.

FORMATS

(ZPL, EPL, APL-D)—Prints a label that lists the

available formats stored in the printer’s RAM, Flash memory, or
optional memory card.

BARCODES

(ZPL only)—Prints a label that lists the available bar

codes in the printer.

ALL

(ZPL, EPL)—Prints labels that list the available fonts, bar

codes, images, formats, and the current printer and network
configurations.

IMAGES

(ZPL, EPL, APL-D)—Prints a label that lists the images

currently stored in the printer’s RAM, Flash memory, or optional
memory cards.

NETWORK

(ZPL only)—Prints a network configuration label. See

Printing Configuration Labels on page 56

.

APLI SW SETUP

(APL-I only)

APLI HW SETUP

(APL-I only)

APLI PRT QUAL

(APL-I only)

APLI PITCH

(APL-I only)

To print labels:

1.

Press the up or down arrow to display label choices.

2.

Press

ENTER

to print the desired label.

PARALLEL COMM.

Set Parallel Communications
Select the communications port that matches the one being used by the host
computer.
Selections: UNIDIRECTIONAL, BIDIRECTIONAL
Default Value: UNIDIRECTIONAL

To modify this parameter:

• Press the up or down arrow to scroll through the selections.

Advertising