Yamaha AW1600 - Manual (Page 111)

111
AW1600 Owner’s Manual
11
Quic
k loop sampler
Chapter 11
Quick loop sampler
This chapter explains how to use the Quick Loop Sampler section.
The AW1600 contains a quick loop sampler that lets you play stereo waveforms (samples) by
striking the four pads.
Each pad 1–4 has four sample banks (A–D) to which you
can assign samples. By switching the sample bank for
each pad, you can use up to sixteen different samples.
When you strike a pad 1–4, the assigned sample will be
sent via pad channel 1–4 to the stereo bus. For each pad
channel, you can adjust the EQ, dynamics, and effects 1/2
send levels just as you can for the track channels or input
channels.
● Signal flow when using the Quick Loop
Sampler
You can load samples into the pads from the sample
library (a library for the Quick Loop Sampler), load a por-
tion of an audio track or audio CD, or load a WAV file.
About the quick loop sampler
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
Sample banks
Pad 1 Pad 2 Pad 3 Pad 4
1 2 3 4
Mixer section
Pads
Pad
channels Stereo
output
channel
Stereo bus