160 g, When ctrl chg mode = 1 – Yamaha AW1600 User Manual
Page 160
AW1600 Owner’s Manual
Setting MIDI messages
14
MIDI and utility functions
160
G
MIDI CH
Selects the MIDI channel that will be used to transmit and
receive MIDI messages such as program changes and con-
trol changes. This area contains the following two items.
• TX .............Selects the transmit MIDI channel, in a
range of 1–16.
While MIDI messages are
being transmitted, the characters “TX” will
be highlighted.
• RX .............Selects the receive MIDI channel, in a
range of 1–16 or ALL. If you select ALL,
MIDI messages of all MIDI channels will be
received (Omni mode).
While MIDI mes-
sages are being received, the characters
“RX” will be highlighted.
H
PGM CHG MODE
Switches program change transmission and reception on/
off.
If program change reception is on, the AW1600 will recall
the corresponding scene when it receives a program
change at the MIDI IN or USB connector. If program
change transmission is on, the AW1600 will transmit the
corresponding program change from the MIDI OUT/
THRU or USB connector when a scene is recalled on the
AW1600.
You can select the following choices.
• OFF ...........Program changes will not be transmitted or
received.
• TX .............Program changes will only be transmitted.
• RX .............Program change will only be received.
• TX-RX .......Program changes will be transmitted and
received.
I
CTRL CHG MODE
Specifies how control changes will be transmitted and
received.
If control change transmission and reception are enabled,
the corresponding control change will be transmitted
when you operate a mix parameter (fader, pan, effect send,
etc.) for track channel 1–16 on the AW1600.
When a control change is received, the corresponding mix
parameter will change.
You can select one of the following choices.
• OFF ...........Control changes will not be transmitted or
received.
• 1 ................Control changes will be transmitted and
received on MIDI channels 1–16. (MIDI
channels 1–16 will correspond to AW1600
track channels 1–16.)
• 2 ................Control changes will be transmitted and
received only on the MIDI channel that is
selected in the MIDI CH field. (This mapping
is compatible with the other AW-series.)
• 3 ................This is the same as 2 in that control
changes of only one MIDI channel are
received and transmitted, but the parameter
mapping differs from 2. (A single MIDI chan-
nel will correspond to AW1600 track chan-
nels 1–16.)
● When CTRL CHG MODE = 1
• In the SCENE screen PC TABLE page you can specify the scene
number that will correspond to each program change number (
HINT
MIDI CH
CC#
PARAMETER
1
7
TRACK CHANNEL 1
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
2
7
TRACK CHANNEL 2
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
3
7
TRACK CHANNEL 3
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
4
7
TRACK CHANNEL 4
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
5
7
TRACK CHANNEL 5
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
6
7
TRACK CHANNEL 6
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
7
7
TRACK CHANNEL 7
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
8
7
TRACK CHANNEL 8
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
9
7
TRACK CHANNEL 9
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
10
7
TRACK CHANNEL 10
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
11
7
TRACK CHANNEL 11
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
12
7
TRACK CHANNEL 12
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
13
7
TRACK CHANNEL 13
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
14
7
TRACK CHANNEL 14
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
15
7
TRACK CHANNEL 15
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
16
7
TRACK CHANNEL 16
FADER
10
PAN
91
EFF1 SEND
93
EFF2 SEND
• For details on the mix parameters that correspond to each control
change, refer to the tables that follow.
• When you operate a mix parameter of track channel 9/10–15/16
on the AW1600, two types of control changes will be transmitted.
HINT