Yamaha AW1600 - Manual (Page 62)

AW1600 Owner’s Manual
Switching virtual tracks
6
Ov
erdub
bing
62
Each audio track 1–16 contains eight virtual tracks. After overdubbing a solo part, you can switch
the virtual track for that track, and record a different take while preserving the previously-
recorded content. Here’s how to switch the virtual track that is selected for a track.
1
In the Work Navigate section, repeatedly
press the [TRACK] key or hold down the
[TRACK] key and use the CURSOR [
]/[ ]
keys to access the V.TR page.
In the V.TR page you can switch the virtual track (1–8)
that will be used for recording/playback by each audio
track 1–16.
1 TRACK
Indicates the track number 1–16.
B V.TR
Indicates the status of virtual tracks 1–8. The virtual
track that is currently selected for each track is indi-
cated by a “
●” symbol. Of the virtual tracks that are
currently not selected, those that have been recorded
are indicated by “
”, and those that have not yet been
recorded are indicated as “–”.
2
Use the CURSOR [ ]/[ ]/[ ]/[ ] keys to
select the virtual track number that you
want to assign to the desired track.
3
Press the [ENTER] key.
The “
●” symbol will be displayed at the position of
the newly-selected virtual track. This virtual track will
now be used for recording/playback.
4
If you want to assign a name to each virtual
track, repeatedly press the Work Navigate
[TRACK] key or hold down the [TRACK] key
and use the CURSOR [
]/[ ] keys to
access the VIEW page.
5
Move the cursor to the TRACK field, and
turn the [DATA/JOG] dial to select a track
number.
6
Move the cursor to the NAME button and
press the [ENTER] key.
The TITLE EDIT popup window will appear, allowing
you to assign a name to the virtual track.
7
Assign a new name to the virtual track.
For details on how to assign a name, refer to page 25.
Switching virtual tracks
1
2