Yamaha AW1600 - Manual (Page 193)

Effects Parameters
193
AW1600 Owner’s Manual
Appendix
■ RING MOD.
■ MOD.FILTER
■ DISTORTION
■ AMP SIMULATE
Parameter Range Description
SOURCE OSC, SELF Modulation source: oscillator or input signal
OSC FREQ 0.0 – 5000.0 Hz Oscillator frequency
FM FREQ 0.05 – 40.00 Hz Oscillator frequency modulation speed
FM DEPTH 0 – 100% Oscillator frequency modulation depth
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
FREQ. 0.05 – 40.00 Hz Modulation speed
DEPTH 0 – 100% Modulation depth
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0 – 100 Filter frequency offset
RESO. 0 – 20 Filter resonance
PHASE 0.00 – 354.38° Left-channel modulation and right-channel modulation phase difference
LEVEL 0 – 100 Output level
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
DST TYPE DST1, DST2, OVD1, OVD2,
CRUNCH Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0 – 100 Distortion drive
MASTER 0 – 100 Master volume
TONE –10 to +10 Tone
N.GATE 0 – 20 Noise reduction
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
AMP TYPE STK-M1, STK-M2, THRASH,
MIDBST, CMB-PG, CMB-VR,
CMB-DX, CMB-TW, MINI,
FLAT Guitar amp simulation type
DST TYPE DST1, DST2, OVD1, OVD2,
CRUNCH Distortion type (DST = distortion, OVD = overdrive)
N.GATE 0 – 20 Noise reduction
DRIVE 0 – 100 Distortion drive
MASTER 0 – 100 Master volume
CAB DEP 0 – 100% Speaker cabinet simulation depth
BASS 0 – 100 Bass tone control
MIDDLE 0 – 100 Middle tone control
TREBLE 0 – 100 High tone control
EQ F 99 – 8.0 kHz Parametric equalizer frequency
EQ G –12 to +12 dB Parametric equalizer gain
EQ Q 10.0 – 0.10 Parametric equalizer bandwidth
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds