Inserting an effect into a track channel, Orehand, P. 99) – Yamaha AW1600 User Manual

Page 99

Advertising
background image

Convenient functions during mixdown/bounce operations

9

Mixdo

wn and bounce oper

ations

99

AW1600 Owner’s Manual

1 EQ L-MID GAIN
B

EQ L-MID FREQ

C

EQ L-MID Q

D

EQ LOW GAIN

E

EQ LOW FREQ

F

EQ LOW Q

These specify the gain, frequency, and Q for the LO-
MID and LOW bands of the return channel EQ. The
range of each parameter is the same as in the EDIT
page of the EQ screen.

1 PAN L
B

PAN R

Independently specify the return channel panning for
the L and R channels.

C

RETURN

Adjusts the input level for return channel 1.

5

Access the desired return channel page,
move the cursor to a parameter, and turn
the [DATA/JOG] dial.

6

To switch effect BYPASS on/off, press the
[ENTER] key.

In the EDIT page, you can press the [ENTER] key to
switch BYPASS on/off regardless of the current loca-
tion.

The chapter “Track recording” explained how to insert an
internal effect into an input channel. In the same way, you
can also insert an effect into a track channel or pad chan-
nel. As an example, here’s how to insert internal effect 1
into a track channel for use during mixdown or bouncing.

1

In the Selected Channel section, repeatedly
press the [EFFECT 1] knob or hold down
the [EFFECT 1] knob and use the CURSOR
[

]/[

] keys to access the SEND page of

the EFF1 screen.

2

Move the cursor to the EFF INSERT field of
the track channel into which you want to
insert an effect, and press the [ENTER] key.

A popup window will appear, asking whether it is ok
to release internal effect 1 from the send/return con-
nection.

3

Move the cursor to the OK button and press
the [ENTER] key.

Internal effect 1 will be inserted into the selected track
channel.

4

Press the [EFFECT 1] knob twice to access
the LIBRARY page of the EFF1 screen.

4

5

6

2

1

3

1

2

3

Inserting an effect into a track
channel

• If the displayed page is different than shown above, make

sure that a track channel is selected as the object of opera-
tions. (This is indicated in the upper left of the screen.) If an
input channel/pad channel is selected, press any one of the
[TRACK SEL] keys.

NOTE

Advertising