ZyXEL Communications 10 - Manual (Page 251)

ZyWALL 10~100 Series Internet Security Gateway
Filter Configuration 19-9
Table 19-3 TCP/IP Filter Rule Menu Fields
FIELD DESCRIPTION OPTIONS
Log Press [SPACE BAR] and then [ENTER] to select a logging
option from the following:
None – No packets will be logged.
Action Matched - Only packets that match the rule
parameters will be logged.
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
Both – All packets will be logged.
None
Action
Matched
Action Not
Matched
Both
Action Matched Press [SPACE BAR] and then [ENTER] to select the action for
a matching packet. Check Next
Rule
Forward
Drop
Action Not
Matched Press [SPACE BAR] and then [ENTER] to select the action for
a packet not matching the rule. Check Next
Rule
Forward
Drop
When you have Menu 21.1.1.1 - TCP/IP Filter Rule configured, press [ENTER] at the message “Press
ENTER to Confirm” to save your configuration, or press [ESC] to cancel. This data will now be
displayed on Menu 21.1.1 - Filter Rules Summary.
The following figure illustrates the logic flow of an IP filter.