ZyXEL Communications 10 - Manual (Page 46)

ZyWALL 10~100 Series Internet Security Gateway
2-2 Hardware Installation
Figure 2-4 ZyWALL 10 Front Panel
The following table describes the LED functions. Not all LEDs are included in every model.
Table 2-1 LED Descriptions
LED COLOR STATUS MEANING
On The ZyWALL is turned on. PWR Green
Off The ZyWALL is turned off.
SYS Green Off The ZyWALL is not ready or failed.
On The ZyWALL is ready and running.
Flashing The ZyWALL is rebooting.
Red On The power to the ZyWALL is too low.
WLAN Green Off The wireless LAN is not ready, or has failed.
On The wireless LAN is OK.
Flashing The wireless LAN is sending or receiving packets.
Green Off The 10M LAN is not connected.
On The ZyWALL is connected to a 10M LAN.
LAN 10M
Flashing The 10M LAN is sending or receiving packets.
Off The 100M LAN is not connected.
On The ZyWALL is connected to a 100Mbps LAN.
LAN
100M Orange
Flashing The 100M LAN is sending or receiving packets.
Green Off The 10M DMZ is not connected.
On The ZyWALL is connected to a 10M DMZ.
DMZ 10M
Flashing The 10M DMZ is sending/receiving packets.