ZyXEL Communications 10 - Manual (Page 295)

ZyWALL 10~100 Series Internet Security Gateway
Firmware and Configuration File Maintenance 22-17
22.4.9 Example Xmodem Firmware Upload Using HyperTerminal
Click Transfer, then Send File to display the following screen.
Figure 22-17 Example Xmodem Upload
After the firmware upload process has completed, the ZyWALL will automatically restart.
22.4.10 Uploading Configuration File Via Console Port
Step 1. Select 2 from Menu 24.7 – System Maintenance – Upload Firmware to display Menu 24.7.2
- System Maintenance - Upload System Configuration File. Follow the instructions as shown
in the next screen.
Choose the Xmodem protocol.
Then click Send.
Type the firmware file’s location, or
click Browse to look for it.