ZyXEL Communications 10 - Manual (Page 309)

ZyWALL 10~100 Series Internet Security Gateway
Remote Management 24-1
Chapter 24
Remote Management
This chapter covers remote management found in SMT menu 24.11.
24.1 Remote Management and the Firewall
When you configure remote management to allow management from the WAN, you still need to configure
a firewall rule to allow access. See the firewall chapters for details on configuring firewall rules.
24.2 Telnet
The only way to configure the ZyWALL for remote management is through an SMT session using the
console port. Once your ZyWALL is configured, you can use telnet to configure it remotely as shown next.
Figure 24-1 Telnet Configuration on a TCP/IP Network