ZyXEL Communications 10 User Manual
Page 278
ZyWALL 10~100 Series Internet Security Gateway
21-12
System Information and Diagnosis
Figure 21-11 WAN & LAN DHCP
The following table describes the diagnostic tests available in menu 24.4 for your ZyWALL and associated
connections.
Table 21-4 System Maintenance Menu Diagnostic
FIELD DESCRIPTION
Ping Host
Enter 1 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the Host IP Address field below.
WAN DHCP Release
Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal
Enter 3 to renew your WAN DHCP settings.
Internet Setup Test
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to the Internet Access chapter for
more details. This feature is only available for dial-up connections using
PPPoE or PPTP encapsulation.
Reboot System
Enter 11 to reboot the ZyWALL.
Host IP Address=
If you entered 1 in Ping Host, then enter the IP address of the computer
you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.