Xantrex Technology ACCB-L - Manual (Page 21)

Blockoff Plates
973-0031-01-01 Rev A 1–7
Blockoff Plates
Upper and Lower Blockoff Plates are included to enclose the open portions of the
Long AC Conduit Box chassis. In the event that an inverter is removed for
service, the Blockoff Plates secure the enclosure to prevent accidental contact
with any AC power within the Long AC Conduit Box.
Remove the Blockoff Plate (upper or lower) from its position for the inverter used
in your installation. The Blockoff Plates will not be needed at all in a dual SW
Plus inverter installation.
See page 2–7 for installation instructions for the Blockoff Plates.
Figure 1-5 Blockoff Plates
Back Front
Upper Blockoff Plate
Lower Blockoff Plate
Rectangular
Knockout