ZyXEL Communications ZYWALL10 - Manual (Page 202)

ZyWALL 10 Internet Security Gateway
Creating Custom Rules 16-13
Table 16-4 Adding/Editing Source and Destination Addresses
FIELD DESCRIPTION OPTIONS
Address Type Do you want your rule to apply to packets with a particular
(single) IP address, a range of IP addresses (e.g., 192.168.1.10
to 192.169.1.50), a subnet or any IP address? Select an option
from the drop down list box Single Address
Range Address
Subnet Address
Any Address
Start IP Address Enter the single IP address or the starting IP address in a range
here.
End IP Address Enter the ending IP address in a range here.
Subnet Mask Enter the Subnet Mask here, if applicable.
When you have finished, click Apply to save your customized settings and exit this screen, Cancel to
exit this screen without saving, or Help for online HTML help on fields in this screen.