ZyXEL Communications ZYWALL10 - Manual (Page 48)

ZyWALL 10 Internet Security Gateway
2-14 Hardware Installation & Initial Setup
Figure 2-11 Menu 3 — LAN Setup
2.9.1 LAN Port Filter Setup
This menu allows you to specify the filter sets that you wish to apply to the LAN traffic. You seldom need
to filter the LAN traffic, however, the filter sets may be useful to block certain packets, reduce traffic and
prevent security breaches.
Figure 2-12 Menu 3.1 — LAN Port Filter Setup
Menu 3.2 is discussed in the next chapter. Please read on.
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters= 2
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: