ZyXEL Communications ZYWALL10 - Manual (Page 92)

ZyWALL 10 Internet Security Gateway
6-16 NAT
the Network Address Translation field in menus 4 and 11.3 is specifically pre-configured to handle this
case.
6.4.2 Example 2: Internet Access with an Inside Server
Figure 6-14 NAT Example 2
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and also go to
menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.
Figure 6-15 Menu 15.2 — Specifying an Inside Server
Menu 15.2 - NAT Server Setup
Port #
----
IP Address
---------------
1
.
Default
192.168.1.10
2. 0 0.0.0.0
3. 0 0.0.0.0
4. 0 0.0.0.0
5. 0 0.0.0.0
6. 0 0.0.0.0
7. 0 0.0.0.0
8. 0 0.0.0.0
9. 0 0.0.0.0
10. 0 0.0.0.0
11. 0 0.0.0.0
12. 1026 RR Reserved
Press ENTER to Confirm or ESC to Cancel: