ZyXEL Communications ZYWALL10 - Manual (Page 248)

ZyWALL 10 Internet Security Gateway
J CLI Commands
Function CLI Syntax Description
config edit firewall set <set #>
rule
<rule #> srcaddr-subnet <ip
address>
<subnet mask> Selects and edits a source address and subnet mask of
traffic which comply to this rule.
config edit firewall set <set #>
rule
<rule #> srcaddr-range <start ip
address> <end ip address> Selects and edits a source address range of traffic which
comply to this rule.
config edit firewall set <set #>
rule
<rule #> destaddr-single <ip
address> Selects and edits a destination address of the traffic which
comply to this rule.
config edit firewall set <set #>
rule
<rule #> destaddr-subnet <ip
address>
<subnet mask> Selects and edits a destination address and subnet mask of
traffic which comply to this rule.
config edit firewall set <set #>
rule
<rule #> destaddr-range <start ip
address> <end ip address> Selects and edits a destination address range of traffic which
comply to this rule.
config edit firewall set <set #>
rule
<rule #> TCP destport-single
<port #> Selects and edits the destination port of the traffic which
comply with this rule. For non-consecutive port numbers, the
user may repeat this command line to enter in the multiple
port numbers.
config edit firewall set <set #>
rule <rule #> TCP destport-range
<start port #> <end port #> Selects and edits a destination port range of traffic which
comply to this rule.
config edit firewall set <set #>
rule
<rule #> UDP destport-single
<port #> Selects and edits the destination port of the traffic which
comply with this rule. For non-consecutive port numbers, the
user may repeat this command line to enter in the multiple
port numbers.
config edit firewall set <set #>
rule <rule #> UDP destport-range
<start port #> <end port #> Selects and edits a destination port range of traffic which
comply to this rule.
config edit firewall set<set #>
rule <rule #> destport-custom
<desired custom port name> Types in the desired custom port name.