ZyXEL Communications GS-3012F Series - Manual (Page 222)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
222
helper-address
<svr_ip> [svr2_ip]
[svr3_ip] Sets the IP addresses of up
to 3 DHCP servers.
13
information Allows the switch to add
system name to agent
information.
13
option Allows the switch to add
DHCP relay agent
information.
13
exit Returns you to User mode. 13
garp join <100-65535>
leave <msec>
leaveall <msec>
Configures GARP time
settings.
13
help Displays help information. 13
history Displays a list of previously
command(s) that you have
executed.
13
hostname
<name_string> Sets the switch’s name for
identification purposes.
Note: Spaces are
allowed in the CLI only
when the system name
is in “quotation marks”.
Example: <config>#
hostname “GS-
3012”
13
https cert-regeneration
<rsa|dsa> Re-generates a certificate. 13
igmp-
filtering Enables IGMP filtering on the
switch.
13
profile <name>
start-address <ip>
end-address <ip> Sets the range of multicast
address(es) in a profile.
13
igmp-snooping Enables IGMP snooping. 13
8021p-priority <0
- 7> Select a priority level (0-7)
with which the switch
replaces the priority in
outgoing IGMP control
packets (belonging to this
multicast VLAN).
13
host-timeout <1 -
16711450> Sets the IGMP host timeout
value.
13
leave-timeout <1 -
16711450> Sets the IGMP leave timeout
value.
13
reserved-
multicast-group
<drop|flooding> Sets how to treat a frame
with a reserved multicast
address.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE