Figure 29 status: port details, Table 7 status: port details – ZyXEL Communications GS-3012F Series User Manual
Page 67
Chapter 6 System Status and Port Details
GS-3012/GS-3012F User’s Guide
67
Figure 29 Status: Port Details
The following table describes the labels in this screen.
Table 7 Status: Port Details
LABEL
DESCRIPTION
Port Info
Port NO.
This field identifies the Gigabit port described in this screen.
Name
This field displays the port name you configured in the Port Setup screen.
Link
This field shows whether the port connection is down, and the speed/duplex mode. It
also shows the cable type (Copper or Fiber) for the combo ports.
Status
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port
for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP.
LACP
This field shows if LACP is enabled on this port or not.